Idec MicroSmart Manual do Utilizador descarregar pdf (Página 451)

100

101

28: AS-INTERFACE MASTER COMMUNICATION

« FC4A MICROSMART USER’S MANUAL » 28-11

Conﬁguration Using WindLDR

Slave conﬁguration can be set using WindLDR in two ways; using the Auto Conﬁguration or Manual Conﬁguration button

on the Conﬁgure AS-Interface Master dialog box.

1. Click the Auto Conﬁguration button to store the conﬁguration information (LDS, CDI, PI) of the connected slaves to

the EEPROM (LPS, PCD, PP) in the AS-Interface master module. For details, see page 28-32.

The auto conﬁguration automatically stores the information of slaves found on the AS-Interface bus to the EEPROM in the

master module, and this completes conﬁguration. Another method of conﬁguration is manual conﬁguration as follows.

2. Click the PCD value “FFFF” of slave address 01 to open the Conﬁgure Slave 01A dialog box.

3. Enter the same value as CDI “07F7” in the PCD ﬁeld. (Set FFFF to PCD values of all unused slaves.)

4. Select initial settings of parameters (PP) P0 through P3, if required.

5. Click the Manual Conﬁguration button to store the selected PCD and parameter values to the master module.

6. Check that the blue shade appears at slave address 01. Now, conﬁguration is complete.

Yellow Shade

Blue Shade

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 524 525

Comentários a estes Manuais

Sem comentários

Idec MicroSmart Manual do Utilizador Página 451

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Idec MicroSmart